For use in spot and general lighting.
Ideal problem solver for ceilings with low installation depth
Front glass
Genuine glass reflector
Aluminum heat sink
The luminaire is only suitable for installation in false ceilings. Installed downlight must not be covered by insulation material. Ensure constant convection.
Installation housing: the LED Downlight can generally be installed in all standard housings for the installation in concrete ceilings; specially tested are the housings from KAISER: HaloX® 100 with tunnel 190 (Type 1281-30) + Front section, i. e. type 1281-11/HaloX® 180 with tunnel 190 (Type 1282-72/1282-75).
Material: die-cast aluminium
Surface: powder coated or galvanized
Suitable for ceiling cut-out: 68 mm
Colour rendering index Ra: 98
Colour distance (MacAdam): 3 SDCM
Life time: 50.000 h (L80 B10)
LED driver included: dimmable with trailing edge
Terminal block and through-wiring (L, N, PE)
weniger lesenCovering of the luminaire with thermally insulating material possible | no |
---|---|
CE-Conformity | yes |
RoHS | yes |
Protection class | II |
Degree of protection | IP40 |
Impact strength | IK00 |
Thermal insulation mark | yes |
Installation, electrical engineering expertise | yes |
Only for indoor use | yes |
Furniture installation, fire protection 'MM' | yes |
Installation note [flammable materials] | flammable materials |
Installation in insulated ceilings, fire protection 'F with roof' | yes |
Note | ensure constant convection and do not cover by insulation material |
Ambient temperature [Ta [°C] | 0 - 25 |
---|
With light source | yes |
---|---|
Including LED driver | yes |
Light cone | Medium beam 21-40° |
---|---|
Colour temperature [K] | 5000 |
Colour of light | daylight white |
Total luminous flux [lm] | 550 |
Beam angle [°] | 38 |
Colour consistency (MacAdam) [SDCM] | 3 |
Colour rendering index Ra | 98 |
Colour rendering index R9 | 95 |
Fit for monitor workplace acc. EN 12464-1 | no |
Peak luminous intensity [cd] | 951 |
Light distributor | reflector |
L80B10 - life time at 25 °C [h] | 50000 |
L70B50 - life time at 25°C [h] | 50000 |
Colour controllable (RGB) | no |
Colour temperature adjustable | no |
Light sharing | symmetric |
Light outlet | direct |
Lamp type | COB LED |
Suitable for number of lamps | 1 |
Length [mm] | 88 |
---|---|
Width [mm] | 88 |
Height [mm] | 29 |
Weight [g] | 265 |
Ceiling cut-out [diameter] [mm] | 68 |
Built-in depth [mm] | 25 |
Operation by Bluetooth | no |
---|---|
Adjustability | Swivelling |
Mounting method | recessed-mounted |
Suitable for general lighting | yes |
Suitable for recessed wall installation | no |
Suitable for wall mounting | no |
Compatible with Apple HomeKit | no |
Compatible with Google Assistant | no |
Compatible with Amazon Alexa | no |
IFTTT support available | no |
Adjustable [°] | 20 |
Kind of disposal at the end of the life time | specific collection points, please consider the local regulations |
Reflector | high gloss |
Suitable for lighting accessories | no |
Reflector colour | silver |
---|---|
Material housing | die-cast aluminium |
Material cover | glass |
Heat sink | yes |
Material of Heat sink | aluminium |
Material of reflector | glass |
Front glass | yes |
Colour | matt white |
Surface finishing | powder coated |
Type of LED driver | LED driver |
---|---|
Lamp power [W] | 8 |
Rated voltage of the LED driver [AC [V] | 220 - 240 |
Lamp holder | without |
Wire cross section | Terminal block and through-wiring (L, N, PE) |
Exchangeable LED driver | yes |
Dimmable | yes |
Type of dimming | trailing edge |
Through-wiring possible | yes |
Electrical connection with connector system | no |